Norwegian Foundry production line for sale by auction
≈ $ 1343
Aabenraa6624 km to "United States/Columbus"
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
Denmark 
Uzbekistan, Tashkent
Uzbekistan, Tashkent
Seller information
Spørsmål vedrørende auksjons innholdet bes henvendes Verktøybørsen & Thomas Tjelta pr telefon: +4798626036
General conditions
Sales commission is included in your bid. Auction charges and VAT is added when applicable.
Payment charges (kr 250,- / EUR 25) will be added.
All invoices have 5 days payment terms.
Payment must be registered before seller can be contacted for collection of purchased items
All purchases must be collected within 21 days. NOTE! We expect buyer and seller to cooperate on arranging collection according to the current restrictions and instructions from the authorities.
An agreement MUST be made with the seller prior to collection
The auction item is approved bu the buyer at collection.
The buyer is responsible for all costs with regards to pick up, transport and export.
CE Label: No
Status: Valid
Inspected at: 2025-03-10
Overall condition: Object(s) working satisfactory when last used
Seller / Auction broker: Thomas Tjelta
Location: Jørpeland, 4100, Norway
Entire foundry currently up for auction in Jorpeland in Norway. In short
Two arc furnaces
one argon oxygen decarbonizer
one teeming ladle pre-heater
ventilation system
compressors
hydraulic press
2 large transformers
2 emulsion pump
stations
large overhead cranes
all necessary accessories for casting ingots and lots more. Over 1.000 metric tones of
steel
TEEMING LADLE PRE-HEATER
Burns Propan and Oxygen
Pre heat teeming ladle to 800℃
Dual burners
twinsystems
3-phase 230vac powered control system
Siemens touch Simatic panel interface
PLC controlled
with external
push-button control panels on burner-side
Gas and temperature guard
Includes 2019-year model SCC Screw
Includes older Atlas Copco Airlet compressor
TEEMING & TRANSFER LADLES
12.5 Tonn teeming ladle
7 Tonn teeming ladle
20 Tonn teeming ladle
10 Tonn teeming ladle
6 Tonn teeming ladle
12,5 tonn transfer ladle
And more. Refer to PDF attachments
750kg TO 12000kg MOULDS FOR STEEL INGOT CASTING
267 different moulds
mid-plates
em-cy buckets
slag buckets and Injectiontubes
Originates from Jørpeland foundry in Norway
Primarily KO-brand foundry tooling Bottom plates
Two
four and eight channel bottom plates
Originates from Jørpeland foundry in Norway
KO-brand foundry tooling Moulds & Bottom plates
1pc: 96cm 404LY - 12.000kg - LWH: 158x158x183cm
17pcs: KO 750kg - LWH: 51x51x117cm
12pcs: KO 1.200kg - LWH: 60x60x142cm
17pcs: KO 2.700kg - LWH: 77x77x182cm
10pcs: KO 3.400kg - LWH: 83x83x204cm
6pcs: KO 4.500kg - LWH: 110x110x183cm
2pcs: KO 6.500kg - LWH: 162x162x106cm
11pcs round bottomplates
22pcs bottomplates
Mid-plates
15pcs: KO 1100x300 - ODxH: 111x30cm
2pcs: KO 1500x300 - ODxH: 150x30cm
2pcs: KO 1500x400 - ODxH: 150x40cm
Injectiontubes
9pcs: Large - ODxH: 95x237cm
4pcs: Small - ODxH: 95x184cm
1pc: IG - ODxH: 65x265cm
Em-cy buckets
3pcs: LWH: 140x140x150cm Slag buckets
24pcs slag buckets
Scrap containers
100pcs scrapcontainers
AOD - ARGON OXYGEN DECARBONIZER
Decarboniser for production of stainless steel
Including phisical control interface
O2 & Argon valvecontrol system
Scetrolab spectrometer material analyzer and Spectro material
preperation grinding machine
Revised remote control-interface
OS: Windows 7 or higher
Software: Uvån Hagfors Teknologi AB
Motorized tilt
fume extractor hood and moveable deck
Including 1 additional vessel. Neseccary for
preliminary masonry
6 MEGAWATT ARC FURNACE
Production year: 1962
Make: Brown Boveri & Cie
Transformer rating: 5100V @ 1000Kva - 3-Phase
Capacity: 14-Ton's
Emulsjon-hydraulic actuated mechanics
Forward tilt
front hatch and lid with graphite electrodes
Watercooled outershell
Approx meassurements: 740x680x790cm
4 MEGAWATT ARC FURNACE
Production year: Unknown
Make: Brown Boveri & Cie
Transformer rating: Unknown
Capacity: 6-7 Ton's
Emulsjon-hydraulic actuated mechanics
Forward tilt
front hatch and lid with graphite electrodes
Watercooled outershell
Approx meassurements: Unknown
LOGISTICS
The foundry is located near the coast (see screenshot from Google Maps) and can preferably be dismantled and transported using barges or similar
The foundry has the expertise and personnel
available to assist with dismantling
relocation
and any reassembly if required
The entire foundry is currently up for auction in Jorpeland
Norway. In brief
this includes two arc furnaces
an argon oxygen decarbonizer
a pre-heater for the teeming ladles
a ventilation system
assorted compressors
a hydraulic press
two large transformers
two emulsion pump stations
a series of large overhead cranes
all accessories needed for casting ingots
and much more. Over 1,000 metric tonnes of steel is included
The teeming ladle pre-heater uses propane and oxygen to burn
and it pre-heats the teeming ladle up to 800℃. It comes with dual-burner twin systems and a 3-phase 230vac powered control system. The control system uses a Siemens touch Simatic panel interface
is PLC controlled
and includes an external push-button panel on the burner-side. It comes with a gas and temperature guard
and the offer also includes a screw compressor model from 2019 and an older Atlas Copco Airlet compressor
The teeming and transfer ladles come in various sizes
ranging from 6 to 20 tonnes. More details can be found in the attached PDFs
The steel ingot casting moulds vary in weight from 750kg to 12,000kg. There are 267 different moulds
mid-plates
emergency buckets
slag buckets
and injection tubes
all from the Jorpeland foundry in Norway. They are primarily KO-brand foundry tooling. Bottom plates come in two
four
and eight channel configurations
all originating from the Jorpeland foundry
The Argon Oxygen Decarbonizer is included for the production of stainless steel and comes with a physical control interface
O2 and Argon valve control system
a Scetrolab spectrometer material analyzer
and a Spectro material preparation grinding machine among things
The offer also includes a 6-megawatt arc furnace from Brown Boveri & Cie
manufactured in 1962
with a capacity of 14 tons
and a second
4-megawatt arc furnace from the same maker with an unknown production year and transformer rating
this one with a capacity of 6-7 tons
Logistics-wise
the foundry is located near the coast and can preferably be dismantled and transported using barges or similar. The foundry has the expertise and personnel available to assist with dismantling
relocation
and any reassembly if necessary