New TyreON TSC2500 mobile minilift car jack
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
+31 6 537...
Show
+31 6 53701658
+31 72 540...
Show
+31 72 540 1002
Netherlands 
40000 kg
Netherlands, Akersloot
30000 kg
Netherlands, Akersloot
40000 kg
Netherlands, Akersloot
50000 kg
Netherlands, Akersloot
40000 kg
Netherlands, Akersloot
80000 kg
Netherlands, Akersloot
60000 kg
Netherlands, Akersloot
35000 kg
Netherlands, Akersloot
80000 kg
Netherlands, Akersloot
60000 kg
Netherlands, Akersloot
80000 kg
Netherlands, Akersloot
50000 kg
Netherlands, Akersloot
Netherlands, Akersloot
3200 kg
Netherlands, Akersloot
Netherlands, Akersloot
Netherlands, Hoensbroek
United Kingdom, Sunderland
Capacity 2500 kg
Lifting height 14 - 155 cm
► Fully pneumatic
► Fully automatic - mobile
► Adjustable in width and height
► For vehicles up to 3200 kg
► Foldable handle
Delivery includes 2 axle supports - 2000 kg each
20 meter air hose
BMW & Audi adapters
SUV adapters
Wooden box L136 x B66 x H35 cm - 150 kg
Required airpressure 7 - 9 Bar
Mobile minilift suitable for delivery vans, passenger cars, sporty, luxury cars and vintage cars.
Fully pneumatic mobile mini lift for lifting loads up to 2500 kg.
Very easy to move and to maneuver, it can lift the front, back or side of a vehicle.
The new model, operated with joystick, is now available. Convenient, reliable, maintenance-free and with a long service life.
TyreON TSC2500
Mobile minilift
Increased productivity and very manoeuvrable
Professional version with solid steel scissor-action arms
The rubber faced jacking pads can be adjusted in height and width to suit any vehicle
Easy positioning of the minilift below the car when fully collapsed
Quick lift feature if you require maximum height in a matter of seconds
Comfortable working height up to 1.55 meters
Long reach with a total length of 220 cm
The robust hand grip comes with a quick air-hose-coupler, connect and go!
1 year warranty on all parts
The mobile minilift is galvanized and finished in quality coating
Only a small air compressor is required
Safety - Mobile minilift
The excess-pressure valve prevents damage due to an overload.
If the control handle is released, the mini lift turns off automatically.
This dead-mans handle is an added safety feature.
The scissor action of the rising arms releases the castor wheels of the floor and the position of the jack is ensured by four large solid steel wheels.
A one-way valve guarantees a fixed position under load at any height.
In case of failure of the air supply, the jack drops a maximum of 10 cm.
A reduction valve ensures uniformly retarded lowering also with heavy load
An air end cap is fitted to the control unit. This turns off the control unit.
Two height adjustable axle stands can be linked under the jacking pads.
During CE certification the construction of the TSC2500 mobile minilift was successfully static tested to 150% / 3750 kg. The Quality Center carries out stringent quality control checks on the jack during every stage of the manufacturing process.
CE certified to comply with current regulations, including:
EN 12100:2010 Safety of Machinery + EN 1494:2000+A1: 2008 Mobile or Movable Jacks and associated lifting equipment
Mobile minilift - Compact and space-saving
All-in-one controller at end of handle
The minilift can be moved, manoeuvred, raised and dropped using the handle
The handle is swingable and can be collapsed both ways
The handle is also foldable for use in confined spaces
Works entirely pneumatically, using two heavy-duty bellows
Broad base of 63 cm for optimum stability
The telescopic arms have a cm-indication and are both limited to 27.5 cm
TyreON TSC2500 mobile mini lift
Technical details
Lifting capacity mobile minilift 2500 kg
Max. weight of the vehicle Approx. 3200 kg
Min. height 14 cm
Lifting height backside 155 cm - different per car
Lifting height frontside 145 cm - differs per car
Lifting height sill of the vehicle 60 cm
Width of the vehicle - min. 120 cm - space between the sills
Width of the vehicle - max. 175 cm - space between the sills
Highest position of the TyreON TSC2500 70 cm
Other information mobile mini lift
Operation Fully pneumatic
Required air pressure 7 - 9 Bar - min. 200 L/min for passenger cars
Weight 110 kg
Dimensions of a the jacking pads - L x B 26 x 8 cm
Dimensions of the minilift - L x B 134,5 x 63 cm
Height of the handle - H 108 cm
Finally Delivery -
mobile minilift and
TyreCARE
TyreCARE means that even after the 12 months guarantee has expired our technical team is always ready to support you in anyway they can. Technical assistance is one of our mean priorities.
Each mobile mini lift is thoroughly tested on all features before it is packed and comes along with
2 adjustable axle stands - 2000 kg each
2 solid steel, rubber-faced jacking pads for all vehicles
2 adapters especially for Audi and BMW
2 SUV adapters
an additional round rubber pad for lifting vehicles at the side
20 meter airhose with quick coupler
Installation and operating manual
TSC2500 mobile minilift