Weinig Doppel-Pack wood milling machine
1010 Wien
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
Manufacturer: Weinig NKT
Type: Double-Pack 205/600/1000 DP20
Wood Input Length:
• Minimum: 130 mm
• Maximum: 1000 mm
• Diameter: Ø370 mm
Wood Cross-Section:
• Minimum: 20x40 mm
• Maximum: 80x180 mm
Wood Output Length:
• Minimum: 3700 mm
• Maximum: 7400 mm
Finger Joint Configuration:
• Vertical/Horizontal: 10/11, 3.8 mm pitch
Glue Type:
• PVAC (white glue), double-sided glue application
Connected Load:
• 65 kW
Proizvođač: Weinig NKT
Tip: Double-Pack 205/600/1000 DP20
Ulazna dužina drva:
• Minimalno: 130 mm
• Maksimalno: 1000 mm
• Prečnik: Ø370 mm
Poprečni presjek drva:
• Minimalno: 20x40 mm
• Maksimalno: 80x180 mm
Izlazna dužina drva:
• Minimalno: 3700 mm
• Maksimalno: 7400 mm
Konfiguracija zubaca:
• Vertikalno/Horizontalno: 10/11, korak 3,8 mm
Tip ljepila:
• PVAC (bijelo ljepilo), dvostrana aplikacija ljepila
Priključna snaga:
• 65 kW
Fabrikat Weinig NKT
Type: Doppel-Pack 205/600/1000 DP20
Holzeingangslänge:
min. 130 mm
Max. 1000mm
Ø370mm
Holzquerschnitt:
Min. 20x40mm
Max. 80x180mm
Holzausgangslänge:
Min.3700mm
Max.7400mm
Zinkenausführung vertikal/horizontal 10/11 3,8mm Teilung
PVAC -Weissleim , 2 Seitiger Leimauftrag
Anschlussleistung 65 kW
Fabricant : Weinig NKT
Type : Double-Pack 205/600/1000 DP20
Longueur d’entrée du bois :
• Minimum : 130 mm
• Maximum : 1000 mm
• Diamètre : Ø370 mm
Section transversale du bois :
• Minimum : 20x40 mm
• Maximum : 80x180 mm
Longueur de sortie du bois :
• Minimum : 3700 mm
• Maximum : 7400 mm
Configuration des entures :
• Verticale/Horizontale : 10/11, pas de 3,8 mm
Type de colle :
• PVAC (colle blanche), application de colle double face
Puissance connectée :
• 65 kW